Name:Custom Made Good Sales Aluminium Alloy Welding Wire tig welding
wire Er4043 Er5356 Er4047
Er4047is widely used in general welding material with the magnesium
of 5% and a little of titanium fine grains.And this product is of
Good forgeability, and well anti corrosiveness, furthermore, this
is a good choice for colormatch in welding after anodic process.
ER5356 is a kind of aluminium alloy welding wire containing
5%magnesium, it is the extensive use welding materials which is
applicable for welding
aluminium alloy or the surface ofaluminium alloy containing 5%
magnesium. This product can also handle by anodic oxidation of
welding provides a good match.
MIG wireSpecification : 0.8mm;0.9mm;1.0mm;1.2mm;1.6mm Weight : 6kg/7kg/9kg
TIG wire Specification : 1.6mm;2.0mm;2.4mm;3.0mm;4.0mm;5.0mm Weight :
5kg/10kg/20kg per box
Welding reference parameters(Current polarity:MIG:DC+ TIG:AC)
|MIG||Welding wire diameter(mm)||1.2||1.6||2.0|
|TIG||Welding wire diameter(mm)||1.6-2.5||2.5-4.0||4.0-5.0|
|AWS Code||chemical composition(%)|
The argon arc welding of aluminum & magnesium alloy welding
wires is used as the filler material, widely used in welding among
al/mg/si, almasilalloy and
Aluminium & magnesium alloy, like:Bicycles, aluminum scoter,
etc.Engine carriage, pressure vessel, armory processing,
shipbuilding.Space shuttle etc.
- Welding Filler Wire
- Spray and Flame Metallizing Wire
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- Lower melting point and higher fluidity than 4043 wires
- Can be used as a substitute for 4043 wires to increase silicon in
the weld metal, minimize hot cracking and produce higher fillet
weld shear strength
- widely used for brazing of aluminum, Al-Mn, Al-Si-Mg alloy
D300 6-7kg/spool (0.8mm-1.6mm)
D270 5-6kg/spool (0.8mm-1.6mm)
D200 2kg/spool (0.8mm-1.2mm)
D100 0.5kg/spool (0.8mm-1.2mm)
1000mm length 5kg/box (1.6mm,2.0mm,2.4mm,3.0mm)
1000mm length 10kg/box (3.2mm,4.0mm,5.0mm,6.0mm)
Every spool product is strongly packed by carton box with antirust
Container load:84spool/pallet , 22pallets/20ft (based on
our factory is a 14 years aluminum welding materials manufacturer in China. Our Mig&Tig aluminum alloy welding wires and rods are selling
very well in both domestic and oversea market. If any new inquiry, please feel free to contact us, we'd like to offer our latest
1. Strict quality control.
2. Best price offer.
3. On-time delivery.
4. Sample offered.
5. OEM and ODM accepted
- Please remove the oxide film and grease of edge-weld and surface of
welding wire from the welding parts Strictly , or it will form lack
of fusion on welding line and cause blow hole, slag inclusion and
such other defects.
- To keep weld penetration without collapsing, please hold the melt
metals by cushioning when weld the wire
Process of production