E308 is a Cr19Ni10 stainless steel electrode with titanium calcium
based coating. Deposited metal has good mechanical properties and
intergranular corrosion resistance. With excellent welding
performance and anti porosity property, anti cracking, red medicine
Pinai. AC and DC dual purpose.
AWS E308L-16 is a lime-titanium type welding rod for general
staniless steels with all postion. Wildely be used for welding of
corrosion-resistant 0Cr18Ni9, 0Cr18Ni9Ti,0Cr19Ni9 and 0Cr19Ni11Ti
stainless steel structures , which working temperature is below
300ºC.The weld metal has excellent mechanical properties and
intercrystalline corrosion-resistance. It has excellent welding
performance and blowhole-resistance. The coating is red-resistant
and crack-resistant. AC/DC.
Used for welding ultra low carbon 022Cr19Ni10 stainless steel
structure, can also be used for 06Cr18Ni11Ti work temperature less
than 300 degrees, corrosion resistant stainless steel structure,
mainly used for synthetic fiber, fertilizer, oil and other
For welding of corrosion-resistant 0Cr18Ni9, 0Cr18Ni9Ti,0Cr19Ni9
and 0Cr19Ni11Ti stainless steel structures , which working
temperature is below 300ºC
Chemical Composition of the deposited metal(%)
|Guaranteed value||≤0.080||0.50~ 2.50||≤1.00||≤0.030||≤0.040||18.0~21.0||9.0~ 11.0||≤0.750||≤0.75|
Mechanical Performance of the Deposited Metal(620ºC×1h)
|Test item||Rm (N/mm2)||A (%)|
Matters needing attention:
1. Redry the electrode at 320-350ºC for 1 hour prior to use,please
don't redry too much unless you can use up all of them.
2. Remove rust, oil, moisture and other impurities on the welding
parts before using.
3. DC power is recommended, because the weld penetration is shallow
as AC welding . To avoid of the covering redness and split , the
current should not be excessive.
4. Reduce the heat input, and keep the swinging scope of the
electrode is not too more.
5.Keep the preheat temperature and interpass temperature at 150ºC.
Delivery & Packaging
Delivery: 10-30 days for stainless steel welding rod after payment according
to quantity or as per customer's requirement.
Packaging: carbon steel welding rod will be packaged by exporting standard
cartons, vacuum packing, plastic case, or as your requirement.
Port: Shanghai/NIngbo/Guangzhou Port
1. If samples available?
Re: We are happy to provide free samples to you. and you do not need to pay for the express charges,if we
think you are an real buyer.
2. If OEM available?
Re: Yes, as we usually do, and the packaging can be changed
according to your needs.
3. What are your company normal payment Terms?
Re: We can offer you many kind of payment terms, such as L/C, T/T, USANCE L/C, Western Union, paypal, etc.
4. What are your company normal export terms?
Re: We normally export with CNF, CIF, FOB, EXW, etc.
5. How many days it will take you to produce mass production for
Re: Normally it will take about 7 - 25 days. It also depends on the
quantity and production seasons.